iRig I-O

iRig Pro I-O

Your new pocket-sized mobile studio

The ultra-compact professional 
audio/MIDI interface 
for all your gear

Now record with any of your gear on the go, and monitor in real time with any compatible device! That’s iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life!

iRig Pro I/O is the next generation of the iRig Pro — the first mobile interface for connecting all of your studio gear to your iPhone, iPad, Mac, PC or Android device to play and record on the go.

iRig Pro I/O is a pocket-sized full-featured audio and MIDI interface that gives you 24-bit/96kHz recording studio quality sound everywhere you go with a few additional essential features for mobile recording.

First, iRig Pro I/O is designed to be “plug and play” easy to use with all of your gear — studio mics, vocal performance mics, guitars, basses, keyboards — whatever it is, iRig Pro I/O can handle it.

Second, iRig Pro I/O features a new 1/8" stereo headphone out with preamp and level control, making it compatible with even the most recent iOS devices. Plus, when used with the optional DC power supply, iRig Pro I/O will charge your iPhone or iPad while in use for unlimited playing and recording time. iRig Pro I/O also features a new MIDI Out jack that gives you even more flexibility and control over your outboard MIDI gear.

Bottom line: iRig Pro I/O is the most versatile and intuitive “all in one” mobile interface available.

MIDI In, MIDI Out

In addition to the MIDI IN jack, iRig Pro I/O now features a MIDI OUT (thru) for even more routing flexibility. Now connect your outboard keyboards, controllers and sound modules and even control surfaces with just one simple interface. iRig Pro I/O comes complete with two standard 5-pin MIDI to 2.5 mm cables for hookup.

Power up

iRig Pro I/O has multiple power options depending upon your recording preferences.

When used as a standalone interface for iPhone, iPad or Android device, you can power iRig Pro I/O with 2 – AA batteries that also provide switchable 48V phantom power for condenser mics.

When use with iRig PSU 3A*, the optional DC PSU, iRig Pro I/O will charge your iPhone or iPad while plugged in for endless or extended recording and playing sessions.

Buy now the iRig PSU 3A!*

When used with a Mac/PC, iRig Pro I/O gets its power from the USB port and the connected laptop. Whichever method you choose, iRig Pro I/O will adapt and is ready to go at a moment’s notice.

Microphone Input

• Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: 3.2 kOhms
• Gain Range: 40 dB
• Phantom Power: +48V ± 4V
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

• Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 1 MOhms
• Gain Range: 27 dB
• Frequency Response: 20 Hz - 20 kHz +/-1.5dB
• Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

• Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
• Headphone Level Control numbered thumbwheel
• Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

• Connector: 2x2.5mm TS Jack

Other Input/Output

• DC barrel: 1x DC barrel. For power and device charging.
• Device Connector: mini-DIN

Common

• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
• Power: 
  • USB bus powered when used with a computer 
  • Battery powered (2xAA included) when used with an iOS device 
  • DC power supply (not included, iRig PSU 3A sold separately)*

• High definition 24-bit/96kHz audio plus MIDI interface for iPhone, iPad, Mac, PC and Android devices
• Connects to everything, yet easily fits in your laptop bag, gig bag or pocket
• Neutrik™ combo input for guitar, microphone or other instruments with a professional quality preamp, phantom power and gain control
• iPhone 7 ready with integrated headphone output with volume control
• Powered via USB bus, two AA batteries or the optional iRig PSU 3A (PSU simultaneously charges iOS device)
• Detachable Lightning and USB cables included for connection to iPhone, iPad, Mac and PC (MFi certified)
• Comes with a Velcro strip to secure iRig Pro I/O to a mic stand
• Comes with over $/€550 worth of full version Software & Apps