STUDIO Q

Studio-Q™ - Desktop Cue & Talkback Controller

The Studio-Q™ is a compact studio talkback controller designed to provide a simple yet full-function cueing system that allows easy communication with artists in a separate booth or on the other side of the control room glass.

The Studio-Q begins with a centrally located talkback switch that activates the built-in microphone, illuminating a bright LED to indicate that the talkback channel to the artist is active. This is supplemented with an external mic input for a dynamic microphone, allowing a stand-mounted mic to function as the main talkback source, or act as an additional talkback mic for a producer. Both the internal and external microphone levels are set via individual trim controls along with a master mic volume. A Radial JR1™ remote footswitch can be connected for hands-free activation of one or both talkback mic''''s. When the Studio-Q talkback is active, the signal is routed to the studio headphone system while it automatically dims the program to the desired level. A separate program level control allows instant access to the playback volume feeding the headphone mix.

Connecting audio to the Studio-Q is straightforward with balanced ¼" TRS program inputs and outputs. The external mic input features a standard XLR for a dynamic microphone, while the JR1 remote connects via ¼" jack. An additional ''''remote out'''' ¼" jack allows you to send a dry contact signal to an external device when the talkback switch is depressed. This can also be set to carry DC power and accommodate a remotely powered LED beacon to attract attention when the artist isn’t wearing headphones or is in the middle of a take.

Following Radial’s pedigree for robust manufacturing, the Studio-Q is made from heavy 14-gauge steel for added durability and shielding against stray magnetic fields. A compact chassis size reduces the footprint on your desktop, with rubber feet that protect the work surface while keeping it firmly in place. The Studio-Q is powered by a 15VDC supply which may be locked in place using a cable clamp.

The Radial Studio-Q... a simple talkback system that improves communication and adds professionalism to your studio.

• Compact desktop cue system for studio recording
• Allows engineer & producer to talk to artist
• Built-in engineer mic and external producer mic input
• Improves studio efficiency, workflow and professionalism

1. DIM: Used to lower the program volume to the desired level when the talkback mic is active
2. INT-MIC: Trim control used to adjust the internal capacitive microphone
3. EXT-MIC: Trim control used to adjust the external producer mic input
4. MIC: Internal omni-directional capacitive microphone
5. REMOTE ON BOTH: Engaged - Pressing either the talkback button or an external
footswitch will activate both the internal and external mic’s. Disengaged - The talkback button will only activate the internal microphone and an external footswtich will only activate the external mic
6. MIC: Is the master output level for the two microphones
7. TALKBACK: Engages both the internal and external microphone (if connected)
and dims the program level
8. PROGRAM: Used to set the level of the incoming pre-recorded tracks to the
headphone system
9. DRY CONTACT/PWR: Sets the function of the remote output as a dry contact relay or to send power to a Radial Beacon™

10. EXT MIC: XLR connection for the external producer microphone
11. PROGRAM INPUTS: ¼” TRS input for program material; L input may also be used in mono
12. OUTPUTS: ¼” TRS connections carry program material mixed with the talkbackmic
13. REMOTE OUT: Dry contact output to control external relay or to send power to a RadialBeacon™
14. REMOTE IN: Connection for Radial JR1-M™momentary footswitch
15. CABLE LOCK: Prevents accidental disconnection from the power supply
16. POWER DC: Connection for 15V powersupply