images

SLS312AI

StudioLive™ AI-Series Loudspeaker

  • Configuration : 3-Way, Tri-amplified Loudspeaker System
  • Frequency Response (-10 dB) : 50 Hz – 23 kHz
  • Frequency Response (-6 dB) : 56 Hz – 22 kHz
  • Nominal Coverage (-6 dB) : 90 x 60
  • Maximum Peak SPL : 131 dB
  • Crossover Frequency : LF: (overlapped) 100 Hz – 1kHz, HF: 1.8 kHz
  • Directivity Index (DI) : 10 dB, >500 Hz
  • Directivity Factor (Q) : 10.0, >500 Hz
  • Transducer: LF Transducer : 12” Ferrite
  • Voice Coil Diameter : n/a
  • MF Transducer : 8” CoActual™
  • HF Transducer : 1.75” Compression Driver
  • Amplifier : Type : Class D
  • Total Power Output : 2000W (Total Power withoutProtection Algorithms & Limiter enabled)
  • LF Power : 2 x 500W Bridged
  • MF Power : 500W
  • HF Power : 500W
  • Rated THD : < 0.05% (20 Hz – 20 kHz)
  • Dynamic Range : 119 dB (A-weighted)
  • Bandwidth : 20 Hz – 20 kHz
  • Cooling : Free Air Convection
  • Connections & Controls : Input Channels : 1 Mic, 1 Line
  • Input Connector Types : 1 XLR(F), 1 Combo
  • Phantom Power : 15VDC (CH1 only)
  • Mic Input Impendance : 1 kΩ
  • Line Input Impedance : 10 kΩ
  • Maximum Input: +22 dBu
  • Output Connector : 1 XLR(M) – Mix Out
  • Controls : Mic Level (Variable: Off to+48 dB), Line Attenuation(Variable: -24 dB to 0 dB),Speaker Attenuation (Variable:-24 dB to 0 dB)
  • Indicators : DSP Preset, HPF On/Off, Network Connected, Network Activity, WiFi Setup, WiFi On,Signal, Limit, Clip, Thermal
  • DSP : Contour Presets : Normal, LBR Source, Floor Monitor
  • HPF : 100 Hz 4th Order Linkwitz Riley
  • Bit Depth : 24-bit
  • Sample Rate : 96 kHz
  • Enclosure Material : 15 mm Baltic Birch
  • Finish : Chemline
  • Grille : Powder-coated Steel
  • Dimensions (H x D x W) : 24.8” x 19.5” x 16.4” (630 x 496 x 417 mm)
  • Unit Weight : 62 lbs (28.12 kg)
  • Handles : One on each side
  • AC Power Input : 100-230V~, 50-60 Hz
  • AC Power Consumption (1/8 Power) : 250W
Category:

Reviews

There are no reviews yet.

Be the first to review “SLS312AI”